Recent: Trayford close coupled toilet?

Mend Maytag Dishwashers

Mend Kitchen Appliances, Dishwashers
Find out how to mend it for free.

Ask Question
Mend Kitchen Appliances, Dishwashers
Click here to mend Maytag dishwashers

Mend > Dishwashers

Mend Kitchen Appliances, Dishwashers

Maytag WU202 Won't Start After Belt Install?

The motor ran before I installed the belt. Now it won't even power up.

Cafego
June 2009
i have changed the belt with a round belt , but when I turn on the d.washer the motor just hums. wont go into a wash cycle. what can I do to fix this?

c. olson
December 2015
Perhaps the tension is too tight as I found out recently... easy to do IF you substituted a v belt (cheap) for the round belt (expensive) or the motor / pulley alignment is slightly askew.

Allan
September 2009
This is a pretty simple machine. If every thing worked before you changed the belt look into the following:
Most likely cause is either a bad receptacle, cable or most likely a bad plug. Make sure the electrical receptacle is live - plug something else into it to test. Remove the bottom cover and check for power at the junction box. If there's no power I'd change the plug.

Steve
June 2009

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Start Belt Motor Power

Mend Kitchen Appliances, Dishwashers
Click here to mend Maytag dishwashers

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Kitchen Appliances, Dishwashers
Click here to mend Maytag dishwashers