Zanussi Electrolux Essential 1200. No water getting in ?

were I ken get the time locker for zanussi 1200 6kg in the Drogheda

jan fecko
July 2012

pull the filter out and check inside the filter housing with a torch.at the back you will see the drain pump impellor.check it rotates freely and hasn't got something jammed in it

ck
May 2009

They have a solenoid operated inlet valve - it lets the water in - they are easy to change. Just follow the water inlet pipe and it will be the thing the inlet pipe connects to.

Some single and some double - not unlike this...

https://spares.bigwarehouse.com.au/images/1546878.jpg

Peccavi
May 2009

I got the answer below on another site - it works - so posting it now in case it helps someone. :)


UNPLUG
just depending on when you tipped it over if there was water in there could be a problem with the level switch which controls water in and out.
Around the side of the machine at the top is a round device approx 3" dia usually front righ hand corner with a tube going to it and also wires.
Just release the tube from the spigot it is pushed on usually with a spring clip,the switch may be held in the "tub full"position hence no water coming in.
Releasing the tube will let any water residue that is stuck up there drain back down.
then try again.

Gerry
May 2009