hi my dad has a briggs and stratton 10d902 engine we hav just put on to his litle rotivator we fitted a new plug and put fresh petrol in but it wont start we checked for a spark and it as a very good one we took off and cleaned the carburetor with carb spray and it still wont start we removed exhuast and petrol dripps out after priming it up and pulling cord a few times and the plug smells of petrol any help would be appreciated thanks
i have had it running now but have to pull plug lead off to stop it can i fit a switch and how do i do it thanks for all your help
wayne
March 2009
i have just disconected the wire from the brake to the coil does this make a difference
wayne
March 2009
yes mate i have done the wiring too thanks
wayne
March 2009
Simply removing the brake will break the ignition circuit- I take it you have ensured the wiring is modified as well?
pleasant
March 2009
i have took the brake off will that make a difference thanks
wayne
March 2009
does the engine have an engine brake fitted. If it's come off a mower than it will have- you will need to overide this when you fit it to a cultivator application.
pleasant
March 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lawn mowers.