It starts ok after manualy priming the petrol through using the rubber push just under the carb. After a few turns the engine stops. Anybody any ideas.
Had a go and even striped the carb now wont start at all. Could it be that its not priming ?
wesco
March 2009
hi it sounds as if the main jet in the carb is blocked.try a squirt of carb cleaner,if that fails you will have to strip it down and check and clean the jets.
whitevanman
March 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lawn mowers.