E01 Code On Carl Lewis Treadmill?

Dose any one know if u can just buy the emergency stop magnet for tthese please x

Pauline Vaux
September 2014

cable on the back of my Carl Lewis treadmill was accidentally pulled off by my daughter, my husband is going to fix it but wants to know if there is a page on how to

Kennedy18
May 2014

buy a new one

harry
February 2010

from where i can get a madnetic cord for the machine..

AA
July 2009

glad it worked! did you need new circuit board?

phil
June 2009

phil, thank you very much! had the e01 problem and your answer solved it! :)))

Mac
May 2009

yeah, when magnetic cord removed error 007 comes up

chris
April 2009

new circuit board fitted - problem solved for me

phil
April 2009

Hi- just had same problem

error e01 means an electrical malfunction.

this could be in any of the connectors,

you need to check all terminals out.

remove right handle and inside you'll see where the wire comes up from the power source - make sure the joining terminals are tight.

remove the screw from under the sensors on handles - ease out sensor unit with a flat screwdriver - check terminals are tight undeneath - do this both sides.

Look under machine - see where cables lead up into handles - check the connections here -

look behind display unit - check connections.

remove black plastic motor cover (unplug unit from wall first) - two screws each side -

on the circuit board you will see two pairs of red/black power leads - push tight -

there are five other removeable white connectors - some have glue on them - again check tightness

if none of this works (as in my case) carl lewis fitness say it's probably circuit board - new one costs £50 delivered - easy swap 0845 603 4120

mine is on the way....

good luck

phil
March 2009

Have you got the magnetic emergency stop plug fitted to the console the machine will not operate without this

Steve
February 2009