Stylus Photo R300 says parts in your printer have come to end of Service li?
Epsom Stylus Photo R300 is flashing up Maintenance icon and reads parts in your printer have come to the end of their service life. The quality of the last printed copy was fine, but it no longer prints. Is there a way of identifying which parts and can they be fixed at home?
take it to a computor shop and ask to have it rechiped
francis flood
August 2007
turn the power off. than press and hold stop-utility-power buttons same time to reset to factory settings,
grach
December 2006
hold down the stop and maintance button,while holding them down turn off the printer keep the buttons pressed down for 10 seconds turn the printer on then release the buttons, the printer will reset itself to original factory settings, once it has done this turn off the printer then turn it on again it will print as before
tom watson
October 2006
As Peter has said, but try downloading a program called SSC Service Utility to reset your waste ink counters could be the problem.
Michael
January 2006
Just had this message in an RX630. Epson service centre says its a print counter that will block printing eventually. Costs about AUD $90 to get it fixed although there are guides for DYI at your own risk.
The sponges under the print mechanism needs changing at the end of this counter for some reason and has something to do with the print run distance and cleaning of the heads.
Sorry i can't give more info.
Peter Christian
December 2005
Could be toner. On Laser-jets they have a toner capacity that expires causing service life info. Check to see if toner is re-placeable.
Terry T. @ tagproductions@sbcglobal.net
November 2005
I can answer this question...
Stylus Photo R300 says parts in your printer have come to end of Service li?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix printers.