Recent: Home max fs506x?

Mend > Washing Machines

Mend Fisher and Paykel 6.5 Rinse Cycle Spin Error

Machine stops at the rinse/spin cycle?

The machine stops at the final few cycles, when the water is too be drained out. The light indicates there is power, and there is the usual sound but the machine dosen't register or click over...
Excellence 6.5 -Fisher and paykel

troubled mum
January 2009
if its a top load washer. there may be something stuck between the outer tub and the basket. if you catch it soon enough you might be able to pull it out without taking anything apart.

bryan
February 2009
If the water is not pumped out can you hear a faint humming sound? If so that noise is the pump trying to spin & pump out the water. Machine will not do anything else until all water is out. The pump can't turn if there is something blocking it. You will need to get someone to clear the pump for you. Don't leave pump on for too long as it will overheat if it is stuck.

Lincoln Appliance NZ
January 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Rinse Cycle Spin Cycle Error

Related Questions ...

Mend error code washing machine hitachi
1

error code C8 for Hitachi washing machine SF-110S?

I have model washing machine SF-110S, Problem is after wash water drain out, then when rinse and spin cycle..... [Read more]
Mend washer-dryer error code spin cycle
1

I have error code E13 on my neff washer-dryer V6320X0GB/01 about 6yr old?

The error code appeard toward the end of a washing cycle. I turned machine off at mains then turned on. E13 va... [Read more]
Mend error code drain pump front load
2

how can i fix my washer?

I am getting an error code oe on lg front load washer. At first would not drain after wash cycle, so I have t... [Read more]
Mend washer control board
1

My front load washer keeps adding minutes ?

I have installed a new control board. I have checked the codes and everything checks out. No error codes. What... [Read more]
Mend programme machine cycle
1

Zanussi WJS 1265W erratic programme?

On occasion the machine does not complete the rinse/drain/spin cycle. Rinses OK then drains OK but then does n... [Read more]
Mend washing machine beeps flashes
1

Washing machine beeps and flashes lights at rinse cycle?

Its a top loader 7.kg fisher and paykel that stops, beeps and flashes on rinse cycle. there is no water left i... [Read more]
Mend error code washing machine pump
4

Fisher Paykel error code 011010000 (104) hums and code lights - Won't turn ?

we were running the washer and it had popped the circuit. I reset the circuit and restarted the washer. It sti... [Read more]
Mend bosch washer error code
1

How can I get my Bosch washer wfmc2100 to complete a cycle?

Just purchased a used Bosch washer (wfmc2100 Nexxt Essence) & it will not complete a cycle. It fills, tumbles ... [Read more]
Mend washing machine no spin smart drive
1

Fisher & Paykel GW700B_U stopped in wash cycle?

My fisher and paykel smart drive washing machine, model GW700B_U, serial no. URL517940 stopped during a wash c... [Read more]
Mend washing machine error code drain filter
1

What's a Zanussi washing machine E20 fault?

Originally I had a E40 fault and the machine would not start the spin cycle. I drained the machine using the e... [Read more]
Mend washing runs cycle
2

Samsung Q1235V - error HE?

My Q1235V Samsung Washing Machine runs for 20 minutes into a cycle and comes up with the error message HE. ... [Read more]
Mend washing machine error hotpoint ultima
3

washing machine stuck in cycle?

hi, i have a Hotpoint Ultima WM75 Washing Machine. yesterday the Spin Cycle would not come up to speed,... [Read more]
Mend error code washing machine cycle
2

FP Smart Drive9 Excellence 7.5 - 7yrs old?

Part way through wash cycle, washer stops with intermittent beep. Re-balance clothes, gets through to end of ... [Read more]
Mend washing machine error code reset
1

What does Error code F27 mean on Whirlpool Duet WFW8300SW?

I start the washer on normal cycle and it fills and then runs for about half the cycle and then stops I get F2... [Read more]
Mend washing machine error codes hotpoint
1

What are error codes F-04 & F-05 on a Hotpoint WD420g ?

What are error codes F-04 & F-05 on a Hotpoint WD420g, It says END implying it has finished drying but it is... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...