I have checked most items cannot get pump to fire up in central heating mode followed trouble shooting steps and leads me to pressure switch fault which works properly. I would like any ideas on this getting frustrated now
What I need to know is what it needs to see for the pump to receive a signal from the circuit board, the pump works okay for the domestic hot water. I have 2 bar in the rads and 1 bar of air pressure in the expansion tank, I seem to think it could be a faulty new timer but dont know what sort of voltage is should send as it is not on the fault diagnosis
Dave
November 2008
i would check to see if power is coming to pump, if so remove cover or grub screw check to see if motor is turning.
a1 boilers
November 2008
Automatic Answer
We may have found other answers which could help you.