faulty ecoflame oil burner ?

buuner is going for 5 mins then cuts out can u help me

paul toman
October 2010

try this, happened to me, take burner out of boiler and check "spark pins" try to fire it up and see if there is a short, a tiny spark further in the burner, the pins are held in with a single screw and are cheap, always check in dark as a short is easier found, hope this works
nothing worse than cold house
hope all goes well

piers
February 2009

This sounds like a fault with the wiring of the burner. You should have a 3 amp fused switch at boiler to stop it triping the main board. Think a spark would sort this problem for you.

Chris Plumbing @ Heating
January 2009