Mend > Dishwashers

How can i fix my Nautilus Dishwasher?

We cannot change the program and there is no display on the time and failure display. When we push and hold the start program for 2 seconds the dishwasher will temporarily run and 11 minutes shows in the time display box for about 2 seconds. We have cleaned the filter and the revolving arms and also checked there are no kinks in the water supply hoses.

Ian
October 2008

Kitchen Appliances, Dishwashers Dishwasher Change Program

Sounds like the control panel has given up. You could try unplugging it from the wall socket for 3-4 minutes plug it back in and see if it resets. If not then get a service company to check & replace the controller.

Lincoln Appliance NZ
October 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Dishwasher Change Program

Click here to mend dishwashers

Hotpoint Start/Pause button flashing?

Water won’t pump out?

How can I mend my Zanussi ZDLN1512 dishwasher?

How to switch on beep on BEKO dishwasher?

Beko dwd5411w?

Which way up is the upper spray arm - with holes uppermost o?

Why is my SMEG Dishwasher showing E1 without water in tray?

K8D45517?

Why is dishwasher not fully drained of water?

Simpson Silencio 850 Dishwasher?

How to install new knob for smeg dishwasher Type 10028; mod:?

Miele G1222 series dishwasher F14 error message?

Mend Dishwashers

Related Categories

Mend > Dishwashers

How can i fix my Nautilus Dishwasher?

Automatic Answer

How can i fix my Nautilus Dishwasher?

I can answer this question ...

How can i fix my Nautilus Dishwasher?

How to mend ...

Mend dishwashers ...

Clear E1 error code on smeg dishwasher with no water or leak?

Why is dishwasher not fully drained of water?

Fisher & paykel Elba DW60CSW1?

BEKO dishwasher tripping the RCD?

Beko dl1243apw dishwasher?