My Honda xr125 has a starting problem .It has no spark even with a new cdi ,coil,spark plug ,and a fully charged battery showing 12volts .The starter turns and it has compression when i place my thumb over the plug hole and try to start it. Please help, thanks.
I have the same problem can someone help me find the anser to the problem
Jacob shone
January 2015
Have the same problem buddy. hop someone has the answer tanks pal
motomadness
May 2011
http://www.hoc.org.uk/help/
honda have a recall on this for some models. check if yours falls into the category
jus
June 2009
I agree, but is the kill switch off or on!
simple things first, check your connections.
the first thing I ask is what have you done, ie: what did you do before it stopped working!
backtrack and double check continually!
jkwobble brisbane
October 2008
check resistance of flywheel pick up,a two wire item should within 80 to 400 ohms.
glen
October 2008
You've got to have a problem with an interlock switch or the kill switch.Start there,find the kill switch wires (usually end in head light bowl)and unplug the multi plug,find the switch connections and short a split pin across the terminals to complete the circuit.bypassing the switch.and spin it over.Or if there is a switch on the side stand or neutral switch,do the same.somewhere you are looseing circuit/voltage,and faulty switch connections sound likely.The other alternative is a fault in the stator pulsar coils.
caine
October 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.