ive got flashing light on display saying ironisation probe or gas flow problem what do i check to remedy this as i dont think i need parts just a clean
three way valve keeps leaking but works fine. can i replace a washer or do i have to replace it as a unit.
stevied
October 2010
i had this problem and depending on the spark ( constant for 10 secs you need a gas valve) or a couple of secs spark its the main pcb. providing of course youve cheaked the probes not dirty.
marty
December 2008
hi
Heatline boilers have alot of problems with this fault, pressume F4 on display. Heatline have a tech department but will have to be on phone for long time if you have a spark it will be a gas problem you need to be gorgi alternatively british gas cost £130 fix any problem but parts take time to get hold of.
Terry
December 2008
Check your gas working pressures(min & max)//your ramp up may be at fault//have you had it serviced by a qualified installer?//bear in mind that unless you are a registered installer you can't touch the appliance//
Josh
October 2008
You're obviously certain you dont need parts so you must be qualified and experienced so you'll already have the answer.
bye
iain
October 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.