Recent: Mountfield sp454?

Mend > Home Alarm Systems

Mend Optima G3 Help Power Zone

please could any help optima g3?

I have fitted 4 shock sensors to a optima g3 panel but non will work why? They all have power and all go to a zone on the panel, what have i done wrong?

Paul
September 2008
OptimaOptima G3Security Systems, Home Alarm SystemsHelp Power Zone
Only you can see the problem without checking your work cant help.

Joe
September 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Help Power Zone

Related Questions ...

Mend security system home
2

optima xm6?

Hi all, I recently moved in a property which have Optima XM6 fitted in the house. I asked the landlord to ex... [Read more]
Mend security system home alarm reset
5

Help! Optima reset?

Anyone know how to clear the lights and reset?. Hi all, all six zone and pa lights are lit following a leng... [Read more]
Mend sensors system keypad
2

Viking mk II 16 zone alarm?

Three of the sensors are blinking fast, it will not set arm or reset.power is on and keypad shows system ok co... [Read more]
Mend help unable test
6

9200 series?

Help needed please unable to set alarm the bell test internal works but not the external the walk test work... [Read more]
Mend initial power up working
5

initial power up on r8 not working?

i have just installed a veritas 8 with remote keypad on initial power up when battery is connected the keypads... [Read more]
Mend veritas 8 alarm
1

how can i fix my veritas 8 alarm??

hey i have a veritas 8 alarm in my house which wont set. when i press the full button the alarm bleeps really ... [Read more]
Mend veritas alarm system power fault
1

veritas R8 - gone off, tamper light on, code not accepted......HELP!!!!?

Early this morning my veritas r8plus system went off after a power fault. Entered code, would not stop. Trie... [Read more]
Mend security system panel
1

accenta g3?

Hi Can you help, I have an accenta g3 alarm. The alarm was triggered by mistake but would not reset from the ... [Read more]
Mend alarm security system
1

How can I set my Scantronic 9448+ alarm?

I have followed instructions from helpful suggestions on this site and have also got copy of installation guid... [Read more]
Mend alarm system zone
2

How can i fix my scantronic 9448 home alarm system?

The electrics tripped out in my house and the alarm system went beserk - firstly the internal alarm noise, the... [Read more]
Mend security system reset
1

Old Wickes hard wire 5 zone alarm ? reset PIN?

Tenants have changed the PIN on an old (10yrs)Wickes hard wired alarm and left without leaving new PIN. I have... [Read more]
Mend alarm battery pir
2

accenta g3 mini zone errors?

i have a accenta g3 mini alarm i changed the battery and powered up but now when i set the alarm zone 2 and 3 ... [Read more]
Mend working red press
1

veritas 8c alarm not working?

please can you help I have a veritas 8c alarm system and for no reason what so ever four red lights are on an... [Read more]
Mend reset power front
1

reset veritas8c?

we had a power failure the main box by the front door reset but i have another by the back door and this one w... [Read more]
Mend working panel zone
2

HOW CAN I FIX MY OPTIMA XM?

HI DUE TO POWER CUT MY OPTIMA XM ALARM STOPED WORKING . ON PANEL ZONE 4 AND POWER LIGHTS ARE ON BUT PANEL IS ... [Read more]
Mend unable alarm panel

Unable to set Optima alarm?
Mend security alarm system

Optima plus 2 small keypad?
Mend optima xm battery

No green light in optima XM burglar alarm?
Mend security system home

How do I reset optima xm alarm, showing. Attack?
Mend replace battery reset

Optima 2 plus house alarm?
Mend house alarm optima

How long does house alarm go for?
Mend security alarm system

I have optima optima xm alarm plus panic alarm unit operated by red plastic?
Mend optima 2 alarm

How can I fix my optima 2 alarm?
Mend security system alarm panel

Optima XM Alarm panel dead?
Mend sounds exit entry

How do i increase the keyboard sounds and exit entry sounds?
Mend optima xl6 set

Optima xl6?
Mend security system engineer

optima xm 4 zone?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Other models...

Optima 2 PlusOptima 8EP396AOptima AccentaOptima CompactOptima G4Optima MX6Optima Optima 2 PlusOptima Optima PlusOptima Optima plus 2Optima PlusOptima Plus 2Optima XLOptima XL4Optima XL6Optima XMOPTIMA XM6

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Topic

Optima G3 Shock Sensor Issue - Help!