nice flat bit of road,in reverse,ig off,bonnet up,spark plugs out,distributtor cap off.push the car with ur knees and holding a finger over the 1st plug hole untill u feel air pushing ur finger off at the same time note which way the rotor arm on dizzy turns(usually anticlock).this will be cyl 1 at tdc.the rotor arm will point to the ht lead for the cyl.from that point fireing order is 1342.connect as such.if not practical for road then turning the crank in correct direction of rotation with socket does the same thing.or jacking up the drivers side and turning the road wheel.just make sure u turn the wheel the right way to make engine turn,back for reverse forward for 1st.
caine
September 2008
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.