my hygena dishwasher leaves everything with a fil on at the end of the cycl?
i have a hygena dishwasher model no AHY8101/2 when it finishes a wash cycle everything has a film on , the glasses are worst. its as if it is not rinsing properly but the salt and rinse aid are topped up
It could be that the solenoid valve on the rinse aid dispenser is faulty and not letting the rinse aid into the machine during the last rinse.If this is the problem then you will have to replace the entire dispenser.
Why not try adding a very small teaspoon of rinse aid during the final rinse to confirm the fault.
Hygena Service Engineer
May 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
