Recent: Safely remove screen protector from a Macbook Air?

Mend > Electric Cookers

Mend Siemens EH77054EU Years Ago Bang

Siemens Induction Hob EH77054EU - both left rings not working?

Hi, I have a Siemens EH77054EU induction hob which is about 6 years old and a while ago it went bang and stopped working on the left hand side. I have taken the top off and the fuse has blown on the power module and there is some blackening around some of the components. I assume it needs a power module at least and I do know if the rings still work as I didnt want to swap the rings in case it blew the working power module. A new power module is £273 on Siemens' parts site and I may end up needing rings at £62 each as well. I dont want to pay this as at that price I may as well get a new hob. What I am after is how to get hold of a damaged hob that I can buy for spares. It doesnt have to be the exact model number as the power module looks common to a number of Siemens / Neff / Bosch induction hobs from around that time. Grateful for any help or if anyone reading has a damaged similar hob they might want to sell or give me.

Steve
April 2008
CHECK THE VOLTAGE RECTIFIER IN THE POWER MODULE. EACH BURNER HAS ITS OWN POWER MODULE
I HOPE THIS HELPS

ELECTRO
January 2010
yes i might be interested in the old hob if you can give me a little more info
thunderbirdsok at hotmail.com

matt
September 2009
Ring 4 is flashing when ring 1 is used.
20 sec. poweroff isn't working.
Fan for ring 3 and 4 isn't working.

When I use ring 4 alone, it is working for a few minutes.
I think the fan or regulator is the problem.
Is this easy to repair?

Frank
August 2008
Hi Colin,
Yes I am interested and thanks, please email me at; steve.bundy@hotmail.co.uk and then we can discuss further.
Cheers,
Steve

Steve
May 2008
Hi,

I have the same fault on the same hob. The power module for the right hand rings was replaced under warranty a couple of years ago (and is still working). I am about to buy a new hob so will take a modest sum for the old one - please respond on this forum if you are interested.

Colin.

Colin
May 2008

Related Questions ...

Mend sewing machine singer motor
1

Singer 201 went bang , smelt and now won’t work?

I am trying to mend my Mothers sewing machine It’s a Singer 201 in a folding table cabinet serial number E... [Read more]
Mend power rear projection
1

No power to the TV?

I have a 50inch rear projection Sagem TV, i went to turn it on and there is no lights on it the cover to the l... [Read more]
Mend heating boiler ravenheat
1

whats wrong ?

since moving into the house we are in 5 years ago our ravenheat boiler works fine only if you bang the bottom ... [Read more]
Mend boiler ignition cold
2

Micron 60ff boiler. Ignition failure?

On most days, usually in the morning and evening when the boiler is programmed to come on from cold, this happ... [Read more]
Mend boiler noise ignition
1

Big bang on ignition?

Hiya, I have got Ferrolie Optima condensing boiler installed less than 2 years ago, now it is making banging n... [Read more]
Mend box couple years
1

why did it happen?

I bought a ONN freeview box a couple of years ago and 2 nights ago while sitting in bed watching it, it blew u... [Read more]
Mend keeps blowing main
3

my triton ivory 2 keeps blowing the main shower fuse!?

3 years ago we replaced our bathroom suite and replaced the shower like for like but just recently the fuse ha... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Electric Cookers ...

Other models...