my picture bends in at each side!?

If the E-W alignment is ok on some modes then it means the circuit involved is working ok. This means you have a software corruption problem. If you look around the back of the set there's a socket to connect a computer to adjust software. Philps dealers also have a service remote to do the same thing in a customers house. I'm afraid your only cure is to contact a dealer, your local friendly (cheap) engineer working from a shed in his garden probably won't have the gear to do the work.

Mike Mitchell
July 2004

The same thing happns with mine, and some of the picture isn't displayed because of the bending right? Very annoying

C.J.
July 2004