LEAKING OIL ON DANFOSS PUMP?

Mine does the same.How would servicing have prevented the pump leaking?

Nick
October 2012

im on my second pump in 11 years, i've had it serviced
every 12 months, any suggestions on where & how much for a pump??, we have 3 oil heatslave & 1 glowwarm gas, never again will i buy a worcester oil boiler.... no way,

welshman
January 2009

You should have the pump replaced and pressure set correctly to manufacturers specification. Work should be carried out by an OFTEC registered technician. You should really have the boiler serviced annually to maintain the safety and efficiency of the installation.

Mike (OFTEC registered technician)
July 2008

oil boiler engineer here with 50 yrs experience. there is a shaft seal kit available for the danfos rb range of oil pumps is abt 20.00 but you must remember that the pump is a gear pump and , if u have ever run out of oil you may have sererly damaged the gear drive or the shear pin within the pump itself so you could be wasting money on a new seal kit.

larry rosen (rosen remedial)
April 2008

I have exactly the same problem on exactly the same model boiler of the same age!
After having the pump to bits several times, I have found that the problem is a small seal that sits on the drive spindle and is held in place by a spring in between it and the body of the pump. I am currently trying to find out if this is available or whether the pump will have to be replaced for the sake of one tiny piece.

Howard

Howard Reader
March 2008

Sounds like the seal (o-ring) may be gone, should be able to pick one up at your local heatmerchants.....

And to be honest, if you hadn't got it serviced in 7 years, you can hardly blame the service engineer!!! In my experience, if these things are left sit to there own devices for so long, disturbing them may result in problems......hence your service interval should be every 12 months as your manufacturer recommends.

If you ignored your car service for 7 years and then had problems after you eventually decided to give it a service you could hardly blame the garage!

And to be fair to your service engineer, have you even let him know?

Tony - A service technician fed up with cheapos!
February 2008