Recent: Will I need to replace my garden tap?

Mend > Tumble Dryers

Mend Kenmore Dryer Belt

My dryer will not tumble?

I am assuming the belt broke on the dryer to make it tumble, but I can't figure out how to get to it? I took off the back pannel but it seems to be somewhere else? I have a Kenmore heavy duty 70 series.

Leslie Richardson
February 2008
Hello,

What is the model number? If your lint screen is accessed from the top of the dryer you have to flip the door open and remove the 2 screws. Then place a putty knife between the top and front panels and push in on the 2 clips to lift the top. Once the top is raised you should see 2 screws inside the front panel that will get the front panel off. Now you can access the belt.

JP
February 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Dryer Kenmore Belt

Related Questions ...

Mend How to mend it?
1

Kenmore laundry center dryer squeaking ?

Looking at a poor quality parts drawing for the Kenmore 417.99175120 laundry center dryer unit but I cannot de... [Read more]
Mend dryer fuse kenmore
2

dryer won't start?

I have a Kenmore dryer model 110 965 912 40. It will not start. We have checked the following; fuse, therma... [Read more]
Mend kenmore model button
1

Kenmore Gas Dryer model # 76912692 seris 900?

When you push the start button you get a loud humming for about 5 seconds and the dryer never starts to tumble... [Read more]
Mend motor belt kenmore
1

how can i fix my kenmore dryer model 110-888700110 series ICX8107406?

the dryer motor starts but it won't spin and i can't find the belt?
Mend kenmore series long
1

Re-attaching Kenmore Series 80 belt-- too long??

I am at my wits end!.. The service tech figured out the original heating problem was the pilot sensor. I figu... [Read more]
Mend dryer making loud noise
1

Kenmore Dryer Making Loud Noise?

My Kenmore 80 Series Gas Dryer heats and turns, but it has a load noise when it is on. Is it the belt that ne... [Read more]
Mend dry belt drum
3

Kenmore 80 series dryer, doesn't dry anymore?

This one has got me stumped. The belt is good. since it turns the drum just fine, and blows air. The heater... [Read more]
Mend dryer repair belt
1

Kenmore 80 dryer?

Kenmore 80 dryer still heats up, there is no noise but the drum does not turn. Any ideas about how to fix it? ... [Read more]
Mend dryer tensioner motor
2

how do i replace a belt on my kenmore 80 series dryer?

how do i replace a belt on my kenmore 80 series dryer? I took the drum out and got the old belt off, but I ca... [Read more]
Mend dryer belt diagram
2

dryer belt replacement(kenmore model#86980100)?

need diagram if possible
Mend electric dryer kenmore
1

how do i replace the belt on my electric dryer kenmore 80 series ?

I would like to have a diagram of how to replace the belt on my kenmore 80 series electric dryer.
Mend Kenmore Dryer Belt
1

How can I remove top of kenmore 80 series dryer?

My daughter said her Kenmore 80 dryer still heats up, there is no noise but the drum does not turn. How do I r... [Read more]
Mend dryer broken apart
4

Is the motor (model #S58NXMKE-6674) on my Kenmore Dryer, broken?

Is the motor (model #S58NXMKE-6674) on my Kenmore Dryer, broken? I have taken my dryer apart, after finding... [Read more]
Mend replace belt kenmore
1

How to replace a belt on a kenmore dryer?

Where does the clamp fit on?
Mend starts motor started
1

My dryer starts up and shuts down a minite later; is it the motor?

I have a Kenmore dryer model number 110.96478800. When I started it up it will run for a couple of minites and... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Tumble Dryers ...