Recent: Safely remove screen protector from a Macbook Air?

Mend > Home Heating Systems

Mend Hot Water Install

Boiler not firing up in central heating but ok in hot water?

I tried to install a room thermostat, whne i turned it on it blew the fuse, i changed the fuse but the central heating wouldn't work anymore, the temperature knob is no longer making a click everytime i turned it clockwise.

alvin
February 2008
sounds like you may have welded the contacts in room stat when you blew the fuse???(now not clicking).there must be a wiring issue or you have wrongly wired it if it blew fuse.

ck
February 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Hot Water Install

Related Questions ...

Mend heat hot rad
1

how many pumps can i use on heating system?

have 17 rads 16 gets heat +hot water 1 rad in attic not getting any heat do i need a 2nd pump and where would ... [Read more]
Mend boiler installation vaillant
2

Valliant ecotec pro 28 installation cost ??

Hello I need to replace my old boiler (13 yrs old Pott. Puma 80) as only the heating works and the hot wat... [Read more]
Mend boiler heating fault
1

heating comes on when i run hot water?

i have an ideal isar he24 when i run hot water the heating comes on. i have had numerous problems with this bo... [Read more]
Mend gas hot water
1

i am going to try & replace my gas hotwater heater for my house (40 gal.)?

I am going to try and replace my gas hot water heater for my home. I have copper pipes now for the hot & cold ... [Read more]
Mend heating pressure radiators
3

Baxi Combi 133 HE Plus loosing WAY to much pressure?

Hope you can lend some advise, I recently had the above boiler installed and I am only running 4 radiators at ... [Read more]
Mend heating pressure radiators
1

Baxi Combi 133 HE Plus loosing WAY to much pressure?

Hope you can lend some advise, I recently had the above boiler installed and I am only running 4 radiators at ... [Read more]
Mend boiler heating error code
3

Ariston microGenus He 32 mffi?

my boiler shows no water pressure E 02 error code .correct code for no water pressure . fill up system with bu... [Read more]
Mend hot combi boiler
1

vaillant ecotec pro28r, not enough hot water?

hello all, i have vaillant ecotec pro 28r combi boiler, problem is there is not enough hot water but heating i... [Read more]
Mend hot fan home
3

worcester 28i junior rsf?

i have no heating or hot water , the fan doesnt seem to kick in and im after advice how i can check if its pcb... [Read more]
Mend boiler keeps cutting out
2

boiler keeps cutting out?

Glowworm 30sxi. We had the water turned off to install new bathroom taps. Water was turned on and all seemed ... [Read more]
Mend combi boiler central heating lockout
3

Vaillant GB2 EH - Got DHW but no CH and its freezin!?

Hi Guys - am in desperate need for tips on how to fix our Vaillant VCW-GB-282 EH Combi. Installed about Apr 19... [Read more]
Mend boiler heating exchanger
1

my potterton performa 24 the hot water has problem - it comes hot and the?

the hot water comes hot and then cold, hot, cold, hot. Is heat exchanger or diaphragm or do i need to power... [Read more]
Mend pressure expansion vessel temperature
1

Glow worm 30ci - shutdown at 18C - 0.5 bar error code, and leak on top up?

The system ran at 20C degrees for a long time, with power down over night for about 7 hours on clock. Went a... [Read more]
Mend boiler heating troubleshooting
5

Hot water has stopped working on Vokera excell 80 SP?

Hot water has stopped working on Vokera excell 80 SP. I have tried to get water in every combination on my boi... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...