does any1 know what colour the wire is that comes out of the speedo that needs cut and earthed i have been telt black n green but my bike wires coming out of speedo is not that colour does anyone know please?
rob
November 2009
have you tried turning the igniton key twice before starting works on mine
tom
December 2008
try dtr125.net u can download the manual from there.... u can build a bike from it
steven
July 2008
hi i have dtr 125 work shop manual if that can help u
steven
July 2008
disconnect the plug going into the servo, use a multimeter and turn the ignition on you should get power going into the plug try all 4 wires to check for voltage if you get none the problem lies further up towqrds your ignition
stevie
February 2008
does the servo work. if not try changeing that. make sure the servo is getting power from the battrey and the cables are connected between the valve and the servo
luc
January 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.