With the filling loop removed on my 18 month old SABRE 24 combi the pressure gauge on the heating circuit continues to rise resulting in the relief valve starting to drip.After shutting the cold main supply to the bolier ( leaving me with no hot water ) the gauge stops rising.Iv'e been told there's a fault in the HEAT EXCHANGER (ie leak )can anyone confirm this or suggest other reason .thanks
keep losing hot water and heating cutting in and out please help
mark
July 2011
thats is generally the mechanical diverter valve broken, not the black actuator the brass body. there may also be a fault with the expansion vessel your better of replacing the boiler.. they are false economy.
sam white 07532191450
June 2009
no havent found one but have been told they are about 120-150 pounds
taggart
October 2008
hi i have also an 18month old sabre 24 and my presure gauge also keeps rising. i have removed the cold water pipe to eliminate that as the problem. so i also have been told that it is the heat exchanger that is faulty.
taggart
October 2008
hi, dont have the answer but i have the same prob just happened to me, am looking round for a cheap exchanger, dont suppose you found one.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.