We moved house and the c and k securitech alarm was already installed but the vendors didn't leave any instructions or manual for it. We've had a power cut and the alarm needs resetting. Can anyone help?
I have a proplem with my active 5 that the walkout time is 0 and I like to set it else I can not use the alarm. The manual does not indicate how to program and I also do not see a potentio meter on the system to trim. Can anybofy help
Dolf
June 2010
how to change entry time on a active 5 control panel
andy
March 2010
this is why the security industry has floors with criminals learning the systems and being able to defeat them ,because idiots are telling anyone how to reset an intruder alarm jesus i mean come on ,id like to see you tell them how to reset a galaxy
jason cherryholme
February 2010
Hi I don't know if you've already cured the problem? if not remove the lid of end station, remove mains and battery, on pcb you will see 2 prongs marked default short these pins out with a screw driver and reconnect battery you should find that the code has reverted to 1234
terry
March 2009
HI, did you ever learn how to reset your alarm as i have had the exact same problem and have no idea how to reset!!
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.