Recent: Will I need to replace my garden tap?

Mend > Home Alarm Systems

Mend Veritas 5VA System House Started

veritas 5va alarm system?

hi we've got a veritas house alarm system on the box it says 5va yesterday the box in the house started to sound (not the like the alarm had been tripped but like the power had gone off) checked on line it said to replace the battery - we've done this and checked and changed the inline fuse also - put it all bck togethr and it's still going off in the box can you advice me as to what to do next please. thank you

sandyk57
November 2016
All your answers appear to be is you either mocking peoples alarms or promoting them, lets think logical for a few seconds, if you wish to say nothing but ' rip it out buy a scantronic' then why dont you send your c.v off to cooper and apply for the role of a salesman, ditto, people are not asking for help buying a new alarm they are asking for help to repair what they have already got in otherwords 'trying to not have to spend hundreds on a minor fix' i fit scantronics alot and they have problems also, you seem to be replying to questions such as ' bell tamper ' witgh idiotic answers like ' rip it out and fit a scantronic' well durr its the bell not the panel, logic pal, logic...

Nick
December 2016
Been in the game for a long time mate,I know my stuff, Veritas is rubbish all the way.

If you are a proper alarm engineer you should know that.
December 2016
Hi sandy, the veritas you have will be a year 1995-2000 type panel so it should be making a buzzing sound as its one of the first panels made, key in code this should show a tamper fault if the unset light is flashing then check pull out fuse in panel and check fuse board incase fuse has tripped, ignore the unprofessional fool reccomending you have the alarm replaced the panel you have were the best ones they ever made the pre 2002 ones are a load of crap, good luck

Nick
December 2016
it's as if the alarm has gone off but not in the outside sounder box just the internal box

sandyk57
December 2016
what kind of noise is the panel making ? is it bleeping if so how many bleeps ?

gts
December 2016
the alarm system was fitted when we moved in and it's rented property but we have to do the up keep to things

sandyk57
November 2016
I don't use such rubbish only the good stuff. You should try the diy forums or electricians forum where the veritas belongs.

Why not opt for a scantronic 9651 you cannot go wrong with them.
November 2016
not a very helpful answer but thanks for taking the time to comment

sandyk57
November 2016
Buy a new alarm such as the scantronic range. Veritas is one of the worst out there cheap and nasty and more trouble than its worth, wouldn't even use one to protect a dog house.

Throw it in the bin, seriously
November 2016

Related Questions ...

Mend alarm doors instructions
1

Scantronic 9600 Exit doors ?

Hi We bought a house with a Scantronic 9600 alarm already fitted and we had the instructions to change the co... [Read more]
Mend home security door
2

Home alarm system?

We recently moved into a house with a Redcot alarm system, when we open our front door a buzzer sounds, this h... [Read more]
Mend alarm security system battery fault
9

Scantronic 9800 bF fault! ?

The system is installed at my inlaws house which has now been let. The internal alarm has suddenly started to ... [Read more]
Mend security system sensor
4

Alarm keeps going off?

The house alarm started going last night at 10.00 and did stop for about 15 minutes inbetween. It was doing t... [Read more]
Mend security system engineer
6

I need a new pcb and battery for Veritas Alarm system?

Can anybody help? My house alarm started going off the other week in the middle of the night and after wait... [Read more]
Mend home security alarm system veritas
3

veritas alarm system?

have just moved into a new house. it has veritas alarm system. we do not have any code details, no instruction... [Read more]
Mend security home system
1

how can i fix my scantronic 9427 alarm system?

i've just moved into my new house and a friend started pressing buttons on my alarm system, which set it of. w... [Read more]
Mend fault alarm system
1

how do i fix fault on 9651 alarm system k02 tamper?

my alarm will no longer arm correctley and displays k02 tamper i havent moved anything or touched anything it ... [Read more]
Mend control panel beeping
2

control panel beeping intermittently?

sl8g3 intruder system hi this system was in our house when we purchased 5 years ago and as worked fine but no... [Read more]
Mend alarm system power cut security
2

Need help fixing my Optima XM6 alarm system?

Recently had a power cut in my area therefore was without electricity for 1.5 days. During the second day of t... [Read more]
Mend alarm system security system control panel
2

How do I fix my ADT Galaxy 8/16 alarm system?

Hello, I inherited an ADT Galaxy 8/16 alarm system with Series 6000 control keypad, when I moved here 2 years... [Read more]
Mend security sensors system
2

9448+ "style" Scantronic alarm system?

A bit of advice needed really? We are currently doing some decorating at home. I started trimming the edges... [Read more]
Mend How to mend it?
1

Intellisense Securite 800L+ intermittant beeping-chirping?

we are in an estate of 18 houses, built 2half yrs ago. all with the same sytem. two weeks ago two outside alar... [Read more]
Mend How to mend it?
1

Accenta G3 detectors beeping intermitently?

I have an Accenta G3 400 alarm system. All of a sudden the detector in the lounge has started beeping at rough... [Read more]
Mend security system home
2

Accenta. Alarm on only one of the outside boxes started without reason?

With the alarm system not set (we were in the house!) the alarm on one of the oustside boxes went off but not ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems