How to replace PCB?My Delonghi Prima Donna S Delux (ECAM26.455.M) suddenly decided it doesn't want to turn on. The display is dead. Nothing on it. No beeps when powering on or off
Power cable tests OK, so it looks like an internal problem. I've ordered a replacement PCB but I can't find any info on how to open this...Click here for how to mend it.
Infused problem with Delonghi Magnifica S?The infuser in my machine is different from that in the manual. It is in an upright position with metal in front of it across the bottom. The infuser won't come out when the red buttons are pressed as there is no space for it to move. I feel I have been sold an old model which has been marked Magnif...Click here for how to mend it.
How can I fix my Delongi Magnifica Coffeemaker ESAM 3500?I have a Delonghi Magnifica Coffeemaker ESAM3500. It is about 5 years old.
It does not power on. When I turn the power off to reboot and then on the diagnostics go on for a couple of seconds, but no message is displayed. Then the machine is dead.
What could be wrong? It it worth repairing or jus...Click here for the fix.
delonghi magnifica remove control panel?Need to replace the control panel does the old one just pop off like the steam knob?...Click here for the repair.
Delonghi Magnifica coffee maker problem?Has some working issues. Water reservoir leaks and the coffee is really slow to come through....Click here for the fix.
How do I hard reset my delonghi magnifica esam 4400?How do I hard reset my delonghi magnifica esam 4400?
All she'll do is scroll language selection and wont take any input. Was just serviced had new boiler and all seals replaced to the tune of $300 in july....Click here for the repair.
My delonghi coffee machine diffuser has dropped.?The diffuser is stuck down the bottom, how do I get it back in place?...Click here for how to mend it.
how can i fix my coffee maker?my delonghi EAM 3200 went 'pop' when we went to make coffee. the red triangle light is now on and it wont work at all. It did not trip the electrics. even after unpugging, leaving for a while and switching back on, the same thing occurs again....Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.