How to mend ... Hot Water Cylinder

Is my frost stat faulty?

My frost stat (located in the garage) is kicking in and firing up my boiler even when the control is OFF. Tha... [Read more]

will this work from a 4 pipe boiler to a 2 pipe boiler?

i have conventinal fsb 30kw boiler which has blown.it is a 4 pipe system, 2 pipes for coil in copper cylinder ... [Read more]

Hot water cylinder?

I live in France. I have the usual 'Master' water heater. It has a fault that I could by-pass if I could tak... [Read more]

my copper hot water cylinder is split,can it be soldered?

my plumber tryed fitting a new gate valve in the 22mm copper pipe that runs to the top of the cylinder.in doin... [Read more]

problem with mid position valve? ?

I hope someone can clarify if I have diagnosed the fault that I think Ive got. A few days ago the central h... [Read more]

not going to mid position on valve?

when I replaced the actuator on the mid position valve and controler I found that I could get heating and i co... [Read more]

Glow Worm Spacesaver bangs & crashes when starting?

I have a wall hung 65000 BTU balanced flue boiler in our kitchen, it came with the house 25 years ago (when ne... [Read more]

No heating - 3 port motorised mid-position valve?

I have a Tower Mid-Position Valve and although I can get hot water my heating will not come on when we switch ... [Read more]

Primatic Cylinder, no hot water C, heating OK how can I fix?

Primatic Cylinder: Central Heating works OK, but no hot water top pipe enntering ciylinder ( heat exchanger c... [Read more]

Hot water is working, why does no cold water come out of taps?

We have a dimplex unvented water cylinder powered by electricity in a new build flat. The hot water works fine... [Read more]

Heating boiler through the programmer is on hot water ok no heating to rad?

Boiler operates in the hotwater mode, put the switch over to the heating,no heating,room stat on max, 3 port v... [Read more]

Spring pressure valve on an open vented system?

I have an open vented system with Baxi bermuda inset 2 back boiler (10 years old), indirect water cylinder (gr... [Read more]

need help fixing problem with some radiators on domestic system?

replaced water cylinder and now havin problem with three rads not heating up. they are close to each other. re... [Read more]

How do I increase my combi boiler hot water temperature above 60*?

Ferolli Maxima 35C. Good animal, had it for 3 years but it niggles me that the DHW is limited to about 60 deg... [Read more]

pottorton profile ?

Hi I just recently bought apressurised cylinder ariston 210 classico i had it plumbed in heating seems fine bu... [Read more]

Water tank not heating?

For the past week I've had no hot water - there is water coming out of the hot tap, but it is cold. My boiler ... [Read more]

Hot water keeps boiling?

DHW (gravity fed HW pumped CH system; Potterton floor standing (?1200) balanced flue boiler replaced 6 years a... [Read more]

Cylinder Thermostat not switching off?

I have recently had my system drained to fit a new bathroom. Since then the hot water has been too hot. I trie... [Read more]

Baxi bermuda 552 back boiler- Pilot works but Burner not igniting? ?

Hi- any assistance would be great!! the boiler has not been serviced in a while and is not providing heating o... [Read more]

Lengthy pipe run for kitchen hot water tap?

I live and own a long narrow bungalow with the hot water cylinder at one end and the kitchen hot water tap som... [Read more]