Recent: How do I remove the flywheel. Mountfield 1640h ride on mower?

Free repair help and information

howtomendit.com find out how to mend just about anything.
Categories

Mend Heating Programmer Water

Free repair help

We have 161 questions about mending 'heating programmer water'

How to mend ... Heating Programmer Water

Pages 54321
Mend heating not hot enough
3

Heating not hot enough?

I have a Baxi Solo Boiler. The water appears to be hot but the heating comes on and automatically switches of... [Read more]
Mend proline pdw080 needs twice
1

PROLINE PDW080 NEEDS ADVANCING TWICE?

Hi i have proline pdw080 that needs advancing it gets hot but the programmer does not move past the heating st... [Read more]
Mend potterton puma 100
1

How can I fix my Potterton Puma 100?

I have a Potterton Puma 100 which keeps closing down. I seem to cure the problem for a while but then it shut... [Read more]
Mend not mid position
1

not going to mid position on valve?

when I replaced the actuator on the mid position valve and controler I found that I could get heating and i co... [Read more]
Mend motorised water switch
6

No heating - 3 port motorised mid-position valve?

I have a Tower Mid-Position Valve and although I can get hot water my heating will not come on when we switch ... [Read more]
Mend heating boiler rad
1

Heating boiler through the programmer is on hot water ok no heating to rad?

Boiler operates in the hotwater mode, put the switch over to the heating,no heating,room stat on max, 3 port v... [Read more]
Mend receiver unit heating
19

Danfoss RX1 not responding?

I have a Danfoss TP5000RF wireless programmer and a Danfoss RX1 receiver unit. For some reason the heating has... [Read more]
Mend wall boiler unit
2

How can I fix my Apollo 15/30B wall mounted gas boiler?

APOLLO 15/30B WALL MOUNTED GAS BOILER -I have recently had a new consumer unit fitted My honeywell programmer... [Read more]
Mend hw ok not ch
2

LANDIS & GYR PROGRAMMER - HW OK BUT NOT WITHOUT CH?

I have recently moved into new flat with Baxi Solo 3 50 PF boiler. There is a Landis & Gyr programmer (don't ... [Read more]
Mend hot water central heating
1

no hot water or central heating?

I do not have any hot water or central heating, the boiler does not fire up at all yet the pilot light is lit,... [Read more]
Mend thelia 23 water
3

Saunier Duval Thelia 23- no heating/hot water?

The problem seems to be the clock/programmer. With the slector switch set to 'auto' the display will normally... [Read more]
Mend moved house owner
1

what do i need to tell the boiler i want heating?

just moved into house .previous owner was about to renew programmer but didnt,its missing ,the boiler works fi... [Read more]
Mend central heating working hot water
1

have central heating working but no hot water?

Have an old potterton SP2000 programmer can set for central heating or just hot water or both. The timer is w... [Read more]
Mend potterton help standing
1

problem with potterton kingfisher II CF40?

Hi all, Hope someone can help, I have a pott kingfisher II CF40, floor standing, gravity fed i believe, as i c... [Read more]
Mend button coming turned
1

Why does the red reset button keep coming on when my boiler is turned on ?

my alpha 280e boiler fails to fire up when switched on.. the boiler has gas, water and electric supply. the ... [Read more]
Mend hot water switched heating
1

my heater comes on when the hot water switches on, why?

i have a Danfoss FP715 programmer and i have switched off the heating part and have the hot water come on for ... [Read more]
Mend hot programmer potterton
2

Radiators heating up when only hot water required ?? programmer problem?

Hi My potterton control is programmed to come on twice a day for hot water only. However the radiators are g... [Read more]
Mend oil boiler fire heating
2

Oil Boiler will not fire up after changing thermostat controller?

Hi, I have an oil boiler (Worcester Danesmoor 15/19), which I use for the heating (I use the electric for the... [Read more]
Mend potterton working heating
1

potterton profile 40e can't be controlled by programmer?

The boiler is working and provides both hot water and heating but runs continuously, even with the programmer ... [Read more]
Mend Heating, Home Heating Systems
3

My Potterton EP3001 programmer has 'reprogrammed' itself?

After a holiday with the power off my EP3001 programmer battery ran out (its old) and when switching on mains ... [Read more]
Pages 54321

Ask Question

Ask your question Do you need free help? Ask your question.

howtomendit.com for free repair help, information and advice.
Ask Question