How to mend ... Blade Too Cut

I have a Qulacast Hedge trimmer which runs but the blades are loose?

I have a Qualcast Hedge Trimmer which normally is great. Now though, the blades have come loose and it does no... [Read more]

repair my mitre saw?

I have a Macallister 1800w 305 mm double bevel slide compound mitre saw and the motor runs fine but the blade ... [Read more]

Fixing my Jigsaw?

My CRAft jIGSAW bought in Aldi is now useless because The Blade Holder Has Broken - was made of very poor meta... [Read more]

red devil table saw PDW5012PB?

Whilst the blade height adjustment works when the table saw is on its side i.e the blade is horizontal, when p... [Read more]

My 19" Harry won't rotate freely?

My old Harry gave up on me yesterday. It seems that the blade will turn o.k. but there seems to be a fouling ... [Read more]

performance pro mitre saw from b& q?

i cant remember how to lift up the blade to cut downwards what button or lever do i pull please .

Lawn mower Fymo 046?

I have just fitted a new blade to the mower and it is catching underneath now when I started to cut the grass ... [Read more]

Petrol Surfolk Colt Mower cylinder type?

The cutting blade seems to be lacking power,as when cutting the grass no matter what setting the cut is on,it ... [Read more]

how can I get my NuTool 14" bandsaw, 3 wheel, model 0134A to cut straight?

I have the original 1780 mm x 3/8 blade in it, but even with the tensioner and guides fully adjusted the blade... [Read more]

Cant engage cutting deck?

i have a sears 26HP garden tractor VGS6500. when i engage the blade to cut it bougs down the tractor almost to... [Read more]

Mower won't move ?

Murray Riding Mower Model #30577X8A, when I place the mower in any gear it will not move. Runs great! I depres... [Read more]

M1A190 Power Craft bandsaw spare parts?

I have just purchased this from my friend hardly used,when I try to cut even 1/4" thick it tracks to the left ... [Read more]

Blade moving too slowly to cut anything?

Although the blade is moving round in my magimix cuisine system 5100, it's going too slowly to cut anything up... [Read more]

Table saw ?

I need to cut some furring strips for roof rafters (existing) to creat a fall of 3" to 0" how can this be done... [Read more]

Removing a 9" Angle Grinder Disc?

I have been using an 9" Titan Angle Grinder SF230J which I fitted with a cutting blade to cut slabs I have bee... [Read more]

ryobi ets 1525 table saw?

Following test carried out; Placed body of combination square in the mitre slot on the table saw with blade o... [Read more]

flymo sprintmaster xe300 twin?

Ran over something hidden in the grass, will now not hover or cut grass, not sure if it is the blade or the im... [Read more]

why does my jcb hedge trimmer not want to cut twigs above 3/8ths of an inch?

jcb pht24f hedge trimmer vgc.runs well cuts well everything up to about 12 mm after which the blade jams wit... [Read more]

petrol hedge trimmer hit wire in fence cant get cogs to align?

petrol hedge trimmer hit wier in fence cant get cogs to align only the rear blade is moving so wont cut hedge ... [Read more]

Table saw kerf plate required?

I have a B & Q portable table saw Performance Pro CLM1500TSS. I broke the kerf plate or table insert which is ... [Read more]