Mend > Sewing Machines

1

How do I set the timing on a Singer 201K?

My 201k has worked well for a long time. Now it knocks hard as soon as it starts to sew although it is perfect... [Read more]

1

how to retime my Janome Mystyle22?

I think the machine needs retiming . I have tried changing the needles, cleaning it, oiling it but it sill won... [Read more]

1

Sanwa Crown Point SZA-645F?

Does anyone know how I could get the bobbin case which holds the bobbin and goes into the bobbin assembly

1

frister rossmann panda 4?

I have inherited a frister rossman panda 4 but it doesn't a user manual. Can I get one free anywhere?

1

how can I get the shuttle hook to stay in the machine,it keeps popping out?

the shuttle hook came out of the machine and now when I try to put it in, it pops out. It's like it's not loc... [Read more]

1

why does the machine thread cuts again and again?

why does the machine thread cuts again and again?

1

silver viscount 9500E foot control?

my wire has snapped on my foot control, how can i fix it, or were can i get new wire for it or parts

1

hydrolic cable cutters?

they loose the force of cutting when ratcheting with your hand as if they are loosing the 700 bar they have ha... [Read more]

1

frister rossman 504 super automatic?

After 40 years of faithful service, my sewing machine will not stop! I have looked at the foot pedal but that... [Read more]

3

e&r classic?

how can i set the timming on my e&r classic i changed the needle and it now keeps looping when im using the ma... [Read more]

1

In need ov manual?

Iv lost insruction manual to my jones 461 and can't remember how to use it as I have bin using a brother for a... [Read more]

1

how do thread the cotton ?

i have an old sew-tric (concord) machine and the cotton that go's through the needle keeps breaking, i think i... [Read more]

2

How to change the bobbin winder shaft on Toyota RS2000?

I would like to know how to change the bobbin winder shaft on a Toyota RS2000. I have ordered a replacement bu... [Read more]

1

threading xl703?

my daughter has a brother pacesetter xl703, she has asked me to teach her to sew. I do not know how to thread ... [Read more]

1

Janome FM 725 threading?

I just got myself a Janome FM 725 off Ebay,unfotuntley it didn't have a intruction book.I got myself loads of... [Read more]

1

Brother XL2620?

I was recently given this machine & noticed on the right hand side (Just under the wheel) there is a built in ... [Read more]

1

Machine identity?

I have a sewing machine with no manual.I have looked all around the machine & all I can find is "Memory Craft ... [Read more]

1

need help with sawing machine?

I have a new home sawing machine and while sawing the thread underneath machine was not catching then the bobb... [Read more]

1

national sewing machine - fabric guide?

hi... I have a National sewing machine from the 70's or 80's. ( i don't see a model number and since it was ... [Read more]

2

Singer 427 bobbin thread won't pick up?

I have a previously very reliable Singer 427, and suddenly, the bobbin thread just will not be picked up. I've... [Read more]