Mend > Circular Saws

1

240v belle cement mixer tipped over ?

Hi all my mixer tipped over by some stupid Labourer Now the drum won't spin motor seems fine I was wandering... [Read more]

performance 780 generator?

My performance 780 generator suddenly stopped, fuel at the plug/ and spark at the plug, but it won't start wit... [Read more]

1

bosch drill with hammer?

to replace the chuck on a 1182.7 due to wear

How can I fix my belle mixer?

Can anyone tell me the compression reading for my belle 150 petrol mixer? Bought roughly 2007?

Pro mitre saw blade guard?

I have a Pro CLM210LSMS mitre saw. I made the mistake of taking off the blade guard mechanism when changing t... [Read more]

1

Is my Mitre saw worth repairing??

I have a Performance Power Compound Mitre saw. I was cutting a small log which got stuck in the blade and brok... [Read more]

1

Where can i buy a replacement cut out button CLM250LTS ?

When the cut out button trips it will not click back so cannot use the saw. Where can i get a replacement ple... [Read more]

How do I remove & refit blade guard?

How do I remove & refit blade guard on a Compound mitre saw FMTC210MS

Power Devil PDW5014 Parts?

Where can I buy parts for the above mitre saw. I need the housing and bearing that transmit power from the mot... [Read more]

pp1100ms 1100w mitre saw?

the blade guard will not lift when I try a saw cut

1

Ref: Pro Performance 1700W Circular Saw?

Stupidly I put the blade on backwards, and on undoing the centre bolt to rectify.. I found that the shaft lock... [Read more]

1

where can i get manual for pro portable table saw with laser clm1500tss?

can I get a manual for pro portable table saw with laser clm1500tss

1

Mac allister mrs1400?

Blades won't rotate not motor

where can I purchase a replacement part ?

Where can I buy a replacement waste collection bag for a Performance Power blow/vac model PP1800 original made... [Read more]

2

how to fix?

My saw runs but blade does not move? is it worth fixing, can I try something?

mitre saw dead?

Hi changed the blade on my tooltec 1800 mitre saw now it is dead I think that I removed a screw that I shou... [Read more]

1

bell 150 110v fitted new switch ?

fitted new switch to 110v 150 model. motor runs when button held in ,but wont keep running. were do i go fro... [Read more]

1

How to stop my chop saw blowing the plug fuse?

My ten inch rebar chop (mitre) saw keeps blowing the plug fuse when I pull the trigger.

1

Is there a manual for the Performance circular saw FMTC10TS?

Is there a user/service manual for the Performance circular saw model FMTC10TS, as i have been given one.

how to fix mac allister 1800w miter saw?

prest spindle lock when moter was running now it wont start