Mend > Vacuum Cleaners

m vax will not release water when i pull the trigger?

vax will not release the water

1

dyson sweeper?

how do i open the dc14 moto to replace the brushes

1

dyson upright cleaner?

how do i change the drive belt

how can I repair flex to the switch on a dyson upright hoover?

how can I repair the flex to the switch on a dyson upright hoover

flamerite serene electric fire ?

My flameritr serene fire just stopped done the usual replaced battery, fuse, read on here to work with remote ... [Read more]

1

How can I remove the brushroll housing on my Dyson DC04 DE STIJL?

I wish to renew the clutch assembly but I have got as far as removing the brush but cannot remove the brushrol... [Read more]

access on/off switch on dyson dc03 ?

access required to switch to repair cable

How can i fix my bissell 1950-e carpet cleaner?

My carpet cleaner has stopped releasing water when the trigger is pressed so it is not wetting the carpet in o... [Read more]

how can i make the belt stay on my kirby classic 3 -2cb?

I replaced the brush roller and belt. when I placed the belt on the belt lifter and try to turn it, the lifte... [Read more]

how to identify part in a eureka 4870F?

I can see that the flat tension (spring-for lack of a better word) that comes from under the steel belt wheel ... [Read more]

how can I fix my kenmore powermate 12 amps model 116 brush?

Hi I have a kenmore vacuum and all of a sudden the brush doesn't work and the light doesn't come on or the bru... [Read more]

replacing drive belt on kenmore #116 powerhead?

no screws visable. several rectangle openings on all sides...tried to use screwdriver to leverage seperation o... [Read more]

How do I loosen one end of the hose so I can attach the wand to it?

Model 116 series #D31613047

vax vzl 6017 an?

the brush belt has always been seemed to long, i have padded out the groove in the brush with some sucess but ... [Read more]

how can i fix my vax rapide carpet cleaner/washer?

my Vax Rapide Carpet Cleaner/ Washer works well but doesn't seem to draw/ suck up as much water once you've cl... [Read more]

cord will not retract on dyson cylinder cleaner?

how do you get to the retraction spring on a dyson cylinder cleaner?

2

bex bissell proheat 2x brushes not rotating?

cleaner spraying water onto carpet and sucking back but no brushes revolving to loosen surface of carpet. ... [Read more]

electrolux epic 6500 sr, vacum motor getting hot?

How do I take apart the back of the canister to get at the vacum motor? The model is a Electrolux Epic 6500 sr... [Read more]

how do i take off the power cord to the electrolux series 3500 sr vacuum cl?

fix electrolux series 3500 sr vacuum cleaner

1

wheel not spinning?

my upright vacuum cleaners wheel has stopped spinning and wont pick up