How do i reset my BEKO WMA1715S Washing Machine ?

my washer is beko wm 5240s it started leaking and wasnt emptying so replaced pump it empting but not spinning and stoping in between wash can anyone help thankyou

donna
July 2010

Thanks, it works for WM 5458 T :)

karolis484
April 2010

The reset trick just got me out of a spot of trouble! I thought I had killed the machine but that put me back on track. Thanks!

Andy
September 2008

Have had the same problem, prewash light flashing right hand side of machine. The shop I purchased machine from have spoken to their Engineer and it's a case of re-setting the machine. Have told me how to do it and the machine's working again - fingers crossed!
Turn power button off (not at wall)
Select 90 degree wash
Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down - Start light will flash.
Leave power on.
Select any Spin position.
Press Start and Cancel button at same time again for 3 seconds - other buttons may start to flash - if they do, press Start and Cancel button together again for 3 seconds.
Machine should be re-set ready for use.
Good luck!

Dave
March 2008

mine is about the exact same age with the exact same bloomin problem and i've got a mountain of washing !!

any help will be greatly appreciated :-)

Gina
September 2007