best to use ladies magnifying mirror on stand and battery powered lamp inside drum. requires working backwards with screwdriver to remove two screws before pulling out holder with overheat solenoid/fuse.
man in brighton
March 2010
Heating element has been changed and still no heat. What should I try next/
Ian
February 2010
tank full light will not go of
barry
September 2009
I just found same fault on my own drier after checking heating element, cabling etc. I should have checked the web first. The switch in question is readily available online for about £15. A couple of notes of caution... for a technician fitting the switch is easy but take care that appliance is checked for any other related fault (in case it's not just the switch at fault). Obviously appliance must be unplugged before any repair is attempted as switch may be live. See also cautioary note on foot of page.
Peter Mc
September 2007
no reset on these.common fault is stat failure.this can be found by putting yiur head in drum and looking up at 1 o clock.remove 2 screws and pull stat out.should be closed circuit
howtomendit.com for free repair help, information and advice.
