the "full tank" light on my tricity bendix tm320w stays on although i've emptied the tank. I've also emptied the water through the stopper at the back of the dryer. I've read other answers where it says to clean the black float, but I can't find it. I've opened up the left side panel, but don't know where to look.
Just used these instructions to get my tumbler functioning again, worked like a charm. Thanks for saving me the cost of an engineer call out.
Kaz
February 2015
Thanks! That did the trick.
Tommy
January 2012
1 screw and then prise top off.clipped down sides??.long time since done one
ck
January 2012
Thanks for this CK. However, I'm still lost. I'm assuming the micro switch is the white plastic thing with wires running in and around it, and the plastic tank is the white plastic right at the very bottom. How do I get into the plastic tank - there doesn't seem to be any opening, or anything. I've unscrewed the one screw I could see but that hasn't helped. Please tell me (step by step if you can) what I should do. Many thanks.
Tommy
January 2012
at the back bottom corner.you should see a micro switch.float is underneath switch inside plastic tank.strip down and clean fluff out
ck
January 2012
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix tumble dryers.