Recent: Home max fs506x?

Mend > Refrigerators

Mend Frigidaire frs20zrg Motor Turning Shaft

Auger for Frigidaire (model frs20zrg) ice dispenser is slipping?

Auger for Frigidaire (model frs20zrg) ice dispenser is slipping?

The auger for my Frigidaire (model frs20zrg) ice dispenser is slipping. The Motor is turning the shaft but the conection is slipping. The auger will turn freely by hand.

Ray Collins
February 2005
I'm having the exact same problem, and as of yet haven't been able to fix it. I took the face plate off of the ice dispenser, and can see that the gears inside aren't sitting properly in one another, causing the mechanism to slip. Anyone have any tips on how to get these buggers to squeeze in on one another?

Jeremy White
March 2005

Automatic Answer

We may have found other answers which could help you.

Click here for Motor Turning Shaft

Related Questions ...

Mend immobiliser starter motor ignition
2

Could it be the imobilliser?

Hi I have a Clio and over the last month it has been clonking out for no reason..firstly I had the battery tes... [Read more]
Mend tumble dryer drum motor
2

i have a indesit is70c tumble dryer that won't spin?

i have a indesit is70c tumble dryer the drum is not spinning have just replaced the Jockey Pulley (ES539967) ... [Read more]
Mend blade motor runs
1

Hoe to fix a Skil 5700 Saw not turning blade?

The blade spins freely, the motor runs normal. Is this a broken drive shaft or gear? Can I repair this some h... [Read more]
Mend tumble dryer drive belt drum
2

Drive-belt tightening on Zanussi TC470?

There are several threads on this forum with respect to this problem (going back to 2004) Here's a list: h... [Read more]
Mend problem motor working
1

How do I fix drive problem on Frister Rossmann 110?

I cannot get a proper "drive" between the motor (which is working fine) and the shaft and the belt is adequate... [Read more]
Mend sewing machine needle motor
1

how can i fix my sewing machine?

hi i have a brother vx 1125 i was sewing away when the needle would not move tried turning the disk by hand to... [Read more]
Mend magimix cuisine systeme
1

Repair for Magimix Cuisine 5200 systeme automatic?

Can I replace the motor shaft? Mine has worn down from being used on soup that was too hot. Now it just spins ... [Read more]
Mend treadmill tries stuck
1

GGTL12920 treadmill incline tries to work but gets "stuck"?

Prior to running a calibration, the display indicated fully inclined at 10 would decrease by .5 and then immed... [Read more]
Mend agitator washer motor
2

My Kenmore 80 series washer doesn't agitate nor spin?

As already described, I have a Kenmore 80 series, dual action agitator, top loader model 110.26801690, serial ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Refrigerators ...