Recent: Home max fs506x?

Mend > In-Car Audio

Mend JVC KD-AVX1 Installed Going System

how can i fix my cd/radio ? there is no power to it?

it is a JVC. It was installed into my truck1999 Dodge) four to five years ago.
There is no power going into the cd/radio system.
My cd won't even come out?

sharon walker
June 2007
CHECK THE TRUCKS FUSEBOX FOR A BLOWN FUSE
IF NONE ARE BLOWN YOU HAVE TO REMOVE THE RADIO
BECAUSE THERE IS A FUSE BEHIND IT, HOOKED TO THE RED WIRE OR IT IS PLUGGED INTO THE BACK OF THE RADIO.
IF ALL THE FUSES ARE GOOD YOUR GONNA NEED TO CHECK THE RED WIRE FOR POWER WITH A CHEAP TEST LIGHT, IF THATS NOT GETTING POWER GO BACK TO STEP ONE.
IF IT IS GETTING POWER / BUY A NEW RADIO
HAVE FUN

JESSE P NELSON
June 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Installed Going System

Related Questions ...

Mend sl beep high
1

SL Compact BUtton Beep Volume Too High ?

Hi, I have an SL Compact alarm system installed. We set it every night going to bed. My wife set it the al... [Read more]
Mend new radiators valve stem
2

New radiators leaking from valve stem?

I've installed some new Kudox radiators and where the valve stem (or is it a valve tail - whatever, the bit th... [Read more]
Mend vaillant ecotec diverter valve
1

Have a vaillant ecotec plus 824. The water gets hot then goes cold?

Have a vaillant ecotec plus 824. Real problems!!The water gets hot for about a minute then goes cold and stays... [Read more]
Mend alarm system installed going
5

I have aparagon alarm system that keeps goig off How do I fix it?

I have a paragon alrm system installed 1996 how do I stop it going off
Mend 1996 veritas r8
13

Scantronic 9800?

Over the past year I've had 2 alarm system's fitted in my home, Yes it is Ridiculous, We had the First alarm f... [Read more]
Mend alarm system security system battery fault
4

gardtec 800 alarm system reset?

I have a gardtec 800 series alarm system. This was installed by the previouse house owner. Last night the inte... [Read more]
Mend home alarm system
3

home alarm system?

I have a galaxy system installed do not have the codes to activate or deactivate. if some one will be kind eno... [Read more]
Mend system activated help
3

can't stop system from alarming?

purchased home with system already installed. did not have it activated, won't stop beeping, States system ... [Read more]
Mend alarms battery system
3

how do i stop my scantronic 9651 false alarms pending a new battery install?

i have a scantronic 9651 system installed but never set. it is now going off 2 or three times a day. the lcd ... [Read more]
Mend zone 1 1
1

zone 1 & 1 ?

had the alarm system installed but everytime i walk past it in the hall zone 1 the sensor lights up which is f... [Read more]
Mend boiler pressure home heating
1

Pressure High on boiler?

I have a Vokera Combi 24 boiler, installed about three years ago. recently pressure has risen from 1.5 bar (no... [Read more]
Mend boiler leak heating
3

Baxi Combi 133 HE Plus loosing WAY to much pressure?

Hope you can lend some advise, I recently had the above boiler installed and I am only running 4 radiators at ... [Read more]
Mend heating pressure radiators
1

Baxi Combi 133 HE Plus loosing WAY to much pressure?

Hope you can lend some advise, I recently had the above boiler installed and I am only running 4 radiators at ... [Read more]
Mend boiler heating fault
2

How can I stop my Ravenheat CSI 85B tripping out?

I had a new Ravenheat CSI 85 B T installed today. It worked for the plumbers who installed it - they left and ... [Read more]
Mend boiler heating system pressure loss
1

Pressure loss on Vokera Boiler?

I am losing pressure on my Vokera HE Compact boiler. It was installed 18 months ago. The first winter it ran f... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend In-Car Audio ...