The proper torque an a T 1024 Cub Cadet cutting blade nuts?
I need to know the proper procedure for tightening the blades on a cub cadet t 1024. The bolts are 3/4" fine thread that holds the blades on. If torqued too tight the bearings will burn up. It has 3 blades, a 50" cut mower deck.
Thanks
if the blade get stiff from tighting you either have a bent blade bolt or the inner bearing sleeve has worn short and allowinr the bearings to bind against the race
Ron Brasher
June 2007
I can answer this question...
The proper torque an a T 1024 Cub Cadet cutting blade nuts?