Recent: LG FC930W Safe Mode: Unlock Front Buttons Without Remote

Mend > Washing Machines

Mend Hotpoint WM1000 Machine Fuse Cycle

MY HOTPOINT 1000 KEEPS TRIPPING AT FUSE BOX!?

My Hotpoint washing machine continually cuts out and trips the fuse box.
It seems ok when I put it into tumble dry mode but when the machine is filling for a normal wash cycle it just cuts out.
Any ideas?

Cheers

STUART
May 2007
Mine does same hotpoint first edition, as soon i select program and power comes on trips fuse box within 2 seconds.
Could it be same problem and are they easy to obtain and install ?

Sb
May 2007
try replacing the heater element this is the likely suspect

Steve
May 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Machine Fuse Cycle

Related Questions ...

Mend washing machine miele pcb
3

Miele W863 flashing rinse light no drum movement?

My Miele W863 suddenly stopped mid cycle with rinse light flashing. Having read the forums I have fitted new m... [Read more]
Mend washing machine control panel circuit board
1

Simpson Eziset 605 ?

My machine has stopped mid cycle and has no lights on the control panel. I have tested the power point and it'... [Read more]
Mend washing machine electrics fuse
2

indesit washing machine?

started the cycle and then tripped household electrics. fuse in plug is working. just had new brushes fitted a... [Read more]
Mend fuse motor drain
1

F&P MW512 Fuse Location?

Hi - we had a perfectly functioning machine until I decided to wash a quilt, figuring I would stand guard for ... [Read more]
Mend machine described talk
2

Washing machine?

I've been looking at the problems with the Electrolux EWX14440W, as described in this forum. They talk about t... [Read more]
Mend paykel smart pride
2

Have a Fisher & Paykel 9 Smart Drive Pride (5.5kg) that is dead?

Another appliance tripped circuit breaker mid cycle for the washing machine. Unfortunately now cant get any l... [Read more]
Mend washing machine repair pump
3

hotpoint wd 64 will not spin anymore!?

My Hotpoint wd64 was on spin cycle when we had a fuse blow on the socket circuit. There was a bang noise come ... [Read more]
Mend washing machine fuse box
2

how can I fix beko wm6355w?

My Beko WM6355W washing machine keep tripping the switches at the fuse box. It usually runs for about 23mins o... [Read more]
Mend beko stopped cycle
3

Beko WM5120W wont start!!?

Hi please can someone help me? My Beko WM5120W suddenly stopped working mid cycle and blew the fuse..I replace... [Read more]
Mend washing machine wash
1

Kelvinator Smart Drive?

Washing machine stopped partway through wash cycle.Total shut-down, no lights when 'power' pressed. Power poin... [Read more]
Mend miele lights machine
1

miele W806?

all lights go off mid-cycle, and machine stops. When I jerk it after a while it restarts. Fuse and electrica... [Read more]
Mend machine turns fills
1

hotpoint aquarius 1200 plus trips the RDC control curcuit?

hotpoint aquarius 1200 plus the machine turns on fills with water washs the cloths; however during the spin cy... [Read more]
Mend help panel door
2

My John Lewis JLWM1202 is nearly dead! Help!?

The display and panel lights are dead; however, the door lock light does come on when the dial is in any posit... [Read more]
Mend exxcel 1400 washing
1

Bosch Exxcel 1400 washing machine. No power mid cycle?

I have a Bosch Exxcel 1400 washing machine. During first water fill, mains tripped. Tried again to check, tri... [Read more]
Mend washing machine no power mid cycle
1

how can i fix my inedsit wie147 washng machine?

Stopped mid cycle(wash)found door open,some water inside,no lights on display,completely dead.Socket ok,fuse o... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...