Help needed with my Hotpoint Aquarious DWF 30?

I HAD THE SAME PROBLEM WOULD NOT FILL OR WOULD FILL A BIT THEN CUT OFF.FOUND IT TO BE THE A BLOCKED PIPE (GUNGE) FROM THE INLET WATER CHAMBER (WHICH HOUSES THE FLOAT/PRESSURE SENSORS ON THE LEFT HAND SIDE OF THE WASHER BEHIND THE SIDE PANNEL) TO THE CHAMBER IN THE ACTUAL WASHER.PIPE RUNS NEAR TO THE FRONT AT THE BASE OF THE MACHINE.I BLASTED IT WITH WATER FROM A HOSE PIPE.RUNNING GREAT NOW.COULD EXPLAIN WHY IT HAS NOT BEEN RUNNING GREAT UNTIL IT STOPPED.NOT ENOUGH WATER GETTING INTO THE MACHINE FOR IT TO WORK 100%.

PHIL BROWN
August 2007