how to fit a new door latch?

its a case of fitting a new door lock...... remove plastic ring clip to door seal, you can see this when you open the door,,,,, its a croc toothed clip that just need teasing off. then un-hook the door seal near the door lock..... MAKE SURE THE MACHINE IS ISOLATED FROM THE MAINS .... then its a case of removing the 2 screws that hold the switch to the cabinet pull out a little way and swap wire for wire to new door lock..... re-assemble in reverse order and give it a test..... dont over tighten the clip to the door seal. Hope this helps.

Mike
May 2007