Recent: Home max fs506x?

Mend > Vacuum Cleaners

Mend Hoover U3485001 Vacuum Cleaner Motor

Hoover pure power U3485001 starts and stops?

Hi,has anyone have any ideas as to what is wrong with my Mum's hoover it's a pure power U3485001 model type QUO1.
It has started to start and stop there is no continuous running
from the motor.Any ideas appreciated.

Ross Forsythe
April 2007
Hi Ross
It sounds to me like the switch needs replacing as it is not making proper contact. By now it has probably stopped working all together. Hoover parts I believe are guaranteed for five years but you have to pay a callout charge. Alternatively you can take off the top part of the Hoover (only about four screws!) take out the switch compartment and take it in to the specialists. By doing this it might make the guarantee void but might still be cheaper than the callout charge!! Hope this is helpful.

Lorraine Barton
April 2007
purepower is notorious for blocking, this would give this problem, this vac has a motor overheat protector if it blocks up the motor stops running, check for any blockages, make sure bag is not too full, if bagless model take out inner cannister and clean,if no sign of blockages, remove filters,2 under bottom of paper bag, 1 at rear of vac, quite large filter, under plastic cover, app 7" x4" remove cover and take out honeycomb filter,leave filters out and try vac again, if this cures problem, replace filters. filter kit costs £7.95, this is for 2 below paper bag and 2 honeycomb filters,1 spare filter, if bagless take out inner sleeve of cannister and do the same test, also if bagless there is a slight chance of faulty motor, not worth repairing, but to be fair to vac, motor can take a lot of hammering,I think you will find more likely to be filters or blockage feel free to e-mail jonsemple@talktalk.net

J.D.S. DOMESTICS SOUTH LANARKSHIRE
April 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Vacuum Cleaner Motor Hoover

Related Questions ...

Mend hoover vacuum cleaner
1

Noisy Hoover Vacuum Cleaner U1650?

With belt and brush removed motor runs properly but very noisy
Mend cleaner switch hoover
1

My vaccum cleaner may have a faulty thermal cut out switch?

My upright Hoover U3525 vacuum cleaner cuts out after a few minutes, it's very new and all the filters, tubes ... [Read more]
Mend motor better buy
1

Where to find a motor for Hoover U5180-900 vacuum?

Looking for a motor for the U5180-900 Hoover vacuum cleaner. Can't seem to get anywhere with my search. Would ... [Read more]
Mend belt hoover model
3

how do i change the belt on my hoover elite model u4641-930?

that is the question. i am afraid i will destroy the bottom of the vacuum if i continue. where does the belt... [Read more]
Mend vacuum cleaner burning smell motor
5

How can I fix my Hoover Windtunnel vacuum?

I have a Hoover Windtunnel upright vacuum cleaner. It does not appear to have a belt, but the motor smells li... [Read more]
Mend hoover belt belts
6

instructions on changing hoover elite belt?

I need instructions on changing the hoover elite vacuum cleaner belt. I have the belts but cannot figure out ... [Read more]
Mend vacuum cleaner upright
3

how do i fix my hoover vacuum cleaner?

i have the simple hoover. no extras, just a hoover upright with a removable tool rack... i bought it for a gre... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vacuum Cleaners ...