Can any body help me?We have the wm 76 and E15 is coming flashing on the board.The thing is we cleared the outlet pipe as that what E15 says you should do.When we go to to start a new programe it goes to washing almost straight away.It then starts to heating and then fills with water.It washes and then drains.If it is draining why is check outlet pipe showing.Could the cycle board gone as we only rplaced them last year?
Hi I have a hotpoint wm76 washing machine when i set the program cycle it starts and water goes in ,but the drum does not turn water does drain ok after while it turns off ,does not spin either.
rick
December 2008
E15 - Water is not being pumped out and a flood condition could occur. Check that the drainage hose is raised to the recommended minimum height and that the pipe is not blocked.
this could also mean the drains are blocked etc
Anymore questions http://www.freewebs.com/msdapudsey1
Just go to the forum
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.