How can I increase pressure on Ideal boiler, Isar m30100?

My pressure dropped to 0, when i bled the radiators. There is a solid pipe from the DHW inlet to CH return (called a filling loop), open these valves and the system will re pressurise from the mains. shut valves off when 1 bar is reached. If your boiler is on, it should restart when 1 bar is reached..

kipps the plumber
October 2010

hi ,, i just need a bit more detial on your last answer of above question,, you say there should be a silver flexible hose going from your mains cold water to the return pipe on your heating
this has a valve on it ,((((is this valve actually on the silver pipe))) you will need a flat blade screwdriver turn the valve till the pressure reaches 1.5bar then shut the valve off. hope this helps (((also about the bar,,does each little notch ad as a bar or do i take it to the 1 bar simble and a half)))) as there is no diagrame even in my instruction booklet given thank you

vince
October 2008

Hi, there should be a silver flexible hose going from your mains cold water to the return pipe on your heating
this has a valve on it , you will need a flat blade screwdriver turn the valve till the pressure reaches 1.5bar then shut the valve off. hope this helps

mitch
April 2007