Recent: Mountfield sp454?

Mend > Vacuum Cleaners

Mend Hoover WindTunnel Replacement Replace Years

Beater brush replacement?

How do you know when to replace the beater brush. I have had a hoover windtunnel for about 5 years. Is there a way to measure?

Bill Hein
February 2007
I usually say anything less than a quarter inch is getting to the end. The Hoovers have about half an inch when new. You can always use a lower setting, but less than a quarter inch will not work very well. If you need a brush, email us at arctic@worldlynx.net

www.vacuumcleanerhelp.com
February 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Replacement Replace Years

Related Questions ...

Mend pressure worcester heat
1

Faulty Worscester 35 CDi loosing pressure?

My Worcester 35cdi has had 4 replacement heat exchanger's in less than 10 years the first 2 were within the fi... [Read more]
Mend alarm optima advice
3

replacement alarm ?

Looking to replace my parents burglar alarm i am capable of doing so the current system is a optima 2 but its ... [Read more]
Mend zanussi washing machine noise
1

motor replacement on zanussi zwd12270s?

when we use our washing machine there is a strange noise when the drum spins, its almost as if there are arcin... [Read more]
Mend replacement house years
2

Johnson & Starley Heater fan bearing replacement?

I have a J & S J25/32 heater in the house. Over the years I've had to replace the fan assembly a few times as ... [Read more]
Mend How to mend it?
1

Replacement wooden beads on velux windows?

I have velux rooflights that are about 15 years old now. Some of them especially those in higher moisture are... [Read more]
Mend years ago straight
6

9800 keypad?

Hi, I have a Scantronic 9800 keypad, was installed many years ago, but recently some of the keys are not respo... [Read more]
Mend How to mend it?
1

almera 1.5e petrol hatch 02 corrosion under radiator?

I have noticed severe corrosion on transverse support plate under radiator.Does this plate which has the front... [Read more]
Mend house fitted years
2

GU10 Replacement?

Hi Our house is fitted with ceiling downlighters - several in each room - all about 7 years old now. Occasio... [Read more]
Mend know where control panel
8

Anyone know where I can get replacement Scantronic 9800 control panel?

My control panel digits are really hard to push now after 16 years. Banham have told me that I need to replace... [Read more]
Mend sewing machine repair motor
2

Replace motor on Riccar 906E?

My Riccar 906E stopped working completely yesterday and there was a strong smell of burning and a crackling no... [Read more]
Mend key alarm turned
1

Where can i get replacement key fobs for my micromark home alarm?

Where can i get replacement key fobs for my micromark home alarm now Micromark have gone bust. Tried the obvio... [Read more]
Mend replace oven 10
1

How do I replace the bulbs in my stoves oven?

Ihave a Stoves 720 EF oven which is 10 years old.The bulbs have gone in the main oven. How do I remove the bu... [Read more]
Mend boiler heating hot water
6

Why can we only get heating when hot water on also now(Dual programer)?

We recently needed to replace head valve due to pump over run problem.(Boiler is Potterton Profile) On putting... [Read more]
Mend boiler 11 years
1

replace programmer?

Does anyone now where I can get a replacement programmer for a Camray Quartet boulter boiler.The boiler is abo... [Read more]
Mend door bosch washing
2

How can I get rid of mould on drum to door seal?

I have a Bosch Classixx 1400Express washing machine about 5 years old. The plastic seal between door and drum... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vacuum Cleaners ...