tumble dryer,creda tcr2?

Take the top off, (2 screws at the back then wiggle and pull top backward).

If belt is still in place, switch drier on, turn drum by hand...if it then continues to run you need a new motor capacitor, To access the part take off right side panel, capacitor is mounted low down near the back (make sure drier is unplugged to do this).

Once you get it replaced you may find that the drier is no longer heating up...If so you will need to take the odd shaped panel off the back, this contains the heationg elements and 2 thermostats. One of these has a small hole in the plastic between the terminals, insert a coctail stick or a needle until you hear a click. When you have put it all back together and plugged it in, hopefully, it will all work again.

Regards Rog8811

Rog8811
February 2007