3 hours ago: Home max fs506x?

Mend > Washing Machines

Mend Kenmore 110.28882790 Series 80 Model

How can i fix series 80 kenmore model 110.28882790?

what is wrong when the upper portion of the agitator will not pull clothes down into lower portion of tub? its like a gear is stripped

keith Patterson
January 2007
It sound like the plastic dawgs are worn. Under the plastic cap (that says Dual Action) at the top of the agiatator, you will find little plastic catches called dawgs. Un do the bolt in the center and replace the dawgs. I think they cost about $10, at your local appliance parts house.

Mikesecs
February 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Series 80 Kenmore Model

Related Questions ...

Mend kenmore series model
1

Kenmore 80 series model 110.27892791?

won't fill with water, just starts agitating
Mend washing machine kenmore cold water
1

Kenmore 80 series model - high pitch sound while filling?

Kenmore 80 series model 110.28803890 makes high pitch sound when cold water filling.
Mend replace washing machine
1

how to replace the coupler on a kenmore model #11092580100 washing machine?

need step by step instructions on how to replace a broken coupler on my kenmore extra heavy duty 80 series was... [Read more]
Mend machine washer level
1

My Kenmore 80 Series Model 110.2880390 Washer ?

Our wash machine is overflowing. No matter if the water level setting is set to small, medium, or large loads ... [Read more]
Mend washer spin top
1

Kenmore 80 series extra capacity washer - no agitation or spin (fuse?)?

I have an 80 series top loading extra capacity plus washing machine from Kenmore. Model #110. I suspect a fu... [Read more]
Mend model ultra fabric
1

82980120 Model No. Kenmore Ultra Fabric Care Heavy Duty 80 series?

The pull knob to start and push to stop washer is stripped. It continuually spins around and cannot be set. ... [Read more]
Mend 80 washing machine
1

Is it fixable or should it just be replaced?

I have a Kenmore 80 series washing machine (model 110.23832100). It works, but it only spins slowly. Consequ... [Read more]
Mend replace timer switch washer
1

How do I replace a timer switch on my Kenmore washer?

I need to replace my timer switch on a Sears Kenmore 80 series washer, model number 110-82980120. How do I get... [Read more]
Mend washing machine kenmore motor
1

how can I fix Sears Kenmore Series 80 washing machine model #110.925871200?

I have a Sears Kenmore Series 80 washing machine with a problem. The water level fills up without any problem,... [Read more]
Mend kenmore washing machine 80 series rinse cycle
1

How can I fix Kenmore 80 Series Washing Machine Model 110.26842690?

I have a Kenmore 80 Series Washing Machine, Model No. 110.2682690, Serial No CG 1320283. When I put the wash o... [Read more]
Mend washing machine kenmore repair
1

Anybody has a manual for Kenmore 80 Series Model 110.28822791?

I need a manual for the Kenmore 80 Series Model 110.28822791
Mend washing machine agitating Kenmore
1

kenmore 80 series washing machine model 110.29882890?

my washer makes clicking sound in bottom of washer during slow and extra slow agitating, otherwise it runs gre... [Read more]
Mend washing kenmore load
1

Why clothing has a foul odor after washing?

Kenmore 80 series. Model 110.28803890. After washing a load of clothes, the wet articles have a foul/soiled ... [Read more]
Mend washer washing machine drain
2

Water fill Question?

Have a Kenmore Washer, 80 series, Model 23832100,Serial #CM4875431, Type III. Water will drain out of the wash... [Read more]
Mend washing machine replacement motor
1

kenmore series 80 washing machine model 110.29882890?

take off cover to replace motor

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...