kenwood chef 901 motor control?

The 2 capacitors are 0.047uF and 0.15uF.
For resistor use 560R or 680R ½W. Good idea to replace the 220R resistor too with ½W

Roy
May 2009

There are 3 components on the 901 motor control that typically fail. A 0.15mf mains capacitor, a 0.1mf mains capacitor and a 56 ohm resistor (at least 1W). I would replace all 3 because if one goes the others will soon after.

GW Australia
March 2009

It seams that I have the same problem here in Iceland.with Kenwood Chef A901D.
The control doesnt work -and one can make it go round and round. They told me that it cant be fixed. It is possible that I have to buy the repair kit ? Any informations what I can do ?

Gunnar Bodvars
February 2009

I had the same problem on my A703C (Australian made Chef). Small burnt out thing was a 56ohm resistor...2 watt I think but I fitted a 5 watt. Caps are 0.15uf and 0.047uf and just today I found smoke coming from one of the caps which is split. We've had over 400mm of rain here in past fortnight so electrical things are failing! All parts were bought from a radio parts shop for under $A2. Good Luck.

Denis Hakanson
February 2007