When you switch on the tumble dryer, there is no heat at all, the change water light is on but flickering. I have changed the microswitch above the float, behind the motor, and it is not that.
Any info would be much apreciated.
I tested the thermostats and one is open circuit and one is closed circuit, therefore i think one is indeed dead.
I followed the link in your post, but it says no product matched my search criteria.
Also i removed the thermostats without taking note of which one went where. Can anyone help with what position the thermostat with the green spot goes in?
Dave
January 2007
It will most likely be a thermostat that has gone.
They come as a kit and both need replacing. They are located above the heater element which is behind the cover at the rear of the machine. Just a simple matter of removing about a dozen screws.
You can purchase the stat kit from us here - just copy and paste in to your browser the following link:
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix tumble dryers.