Recent: Will I need to replace my garden tap?

Mend > Tumble Dryers

Mend Beko drcs76w Dryer Stopped Replaced

Beko drcs76w condensing tumble dryer won't start?

I have a beko drcs76w condensing tumble dryer. It stopped working completely, so I replaced the heating element and the control board PCB.

Now, when I press the on switch, the control panel lights up, but always with the green light on "drying" mode, and when I press the start button I hear 3 beeps. I can't get it to actually start drying.

Does anybody have any idea what might have gone wrong? I've opened everything up and checked that all of the connections were put in place correctly.

Richard
December 2022
Hi Ghji - yes, there was very clear visible damage to both the element and the control board which is why I replaced them. It is possible that the door switch is faulty and I will check that, although obviously that was not a problem before the tumble dryer stopped working completely.

Richard
December 2022
Did you check the element or just blindly replace it?
I've seen a couple of suggestions the door switch needs checking - simple enough to do with a test meter or even a battery and bulb.

Ghji
December 2022

Automatic Answer

We may have found other answers which could help you.

Click here for Dryer Stopped Replaced

Related Questions ...

Mend white knight dryer help
1

White Knight reverseTumble Dryer Model C44AW. Need help PLEASE!?

I put in my washing pressed start and nothing happened. I checked the start switch and it didn't work so I bou... [Read more]
Mend tumble dryer heater element no heat
2

Whirlpool AWZ 220 Heater element or thermostats faulty?

I have replaced the heater element once before about 3 years ago. Again the dryer has stopped producing heat y... [Read more]
Mend miele dryer heating element
2

How can I fix my miele T230c dryer?

My miele T230c dryer has stopped heating. I have followed all the suggestions on this site regarding the therm... [Read more]
Mend aquarius condenser dryer
1

what part do i need?

I have a HOTPOINT AQUARIUS condenser dryer CTD00, as water kept gathering at the bottom i replaced the condens... [Read more]
Mend tumble dryer belt repair
1

Drum struggling to turn?

Hi..... Tumble dryer stopped working as belt became slack and the small wheel that belt goes around shattered.... [Read more]
Mend tumble dryer no power repair
1

how can i fix my hotpoint ctd40 tumble dryer?

the machine was working normally then stopped no lights lit or power on light machine dead replaced fuse still... [Read more]
Mend replaced dryer stopped
1

no heat still tumbles ?

i replaced the heater ,1yr ago on this dryer and thermos.once again the dryer has stopped heating,took the bac... [Read more]
Mend stopped lights working apart
1

beko condenser dryer?

my dryer stopped working,it was drying but it just stopped,all lights are not working apart from the inside do... [Read more]
Mend condenser dryer Hotpoint fuse
1

Dryer stopped mid-cycle?

Hotpoint Aquarius Condenser dryer TDC30. Stopped mid-cycle. Check power source and replaced fuse. Start stop b... [Read more]
Mend zanussi tumble dryer
2

Zanussi TC481W Condenser Tumble Dryer Overheating?

Recently my Zanussi TC481W Condeser Tumble Dryer, stopped rotating. I worked out the belt was broken and repla... [Read more]
Mend white dryer model
1

how can i fix my white Knight dryer model 447wv?

High, the drum stopped turning and got very hot so i replaced the capacitor. now the drums turning fine, but ... [Read more]
Mend siemens dryer thermostat
2

Siemens WT2100 Dryer?

Hi, my dryer stopped getting warm so I've replaced the thermostat and it worked for a couple of times but has ... [Read more]
Mend tumble dryer capacitor motor
2

zanussi condenser dryer TC 7102 W?

set dial for timer and then push start button, power light comes on but drum does not turn...all you hear is a... [Read more]
Mend tumble dryer heating element fault
2

Hot Point D/Dryer tdc60s stopped heating up. Again!?

Upon inspection I replaced the element (£42) as this had burnt out. I also replaced the thermostats (£20) as... [Read more]
Mend creda replaced element
1

dryer no heat?

my creda t622cw had stopped producing heat so i replaced the broken element and tryed it again eveything is w... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Tumble Dryers ...