Recent: Home max fs506x?

Mend > Vacuum Cleaners

Mend Hoover U5458-900 Model Changed Belt

How do I fix (no suction) a Hoover Supreme Wind Tunnel Vacuum Model U5458-9?

I've changed the belt and the agitator and brushes turn but I get no suction. I've Cleaned all the filters and checked for blockage and didn't find any. It is a Hoover Supreme Wind Tunnel Vacuum Model U5458-900. Thank You.

Jay Campbell
December 2006
Check the hoses for cracks or clogs. The accessory hose tends to clog up right where it attaches to the main body. If you need any more help, email us at arctic@worldlynx.net

Help Around the House
December 2006

Automatic Answer

We may have found other answers which could help you.

Click here for Model Changed Belt

Related Questions ...

Mend mower blades craftsman
2

why doesnt my mower cut on the right side?

I have a craftsman mower and it cuts little to no grass on the right side (discharge side). I have sharpened ... [Read more]
Mend How to mend it?
1

timming belt/chain?

very sorry 1st question not very good. when is the right milage to change timming belt/chain on a nissan d22 ... [Read more]
Mend tumble dryer replacement motor
3

why does my tumble dryer's belt keep snapping ?

Beko model DRCS 68W Condenser dryer. I have changed the belt. Which was a real pain. It worked for a few days... [Read more]
Mend 2001 water drive
2

water pump?

do i need to change drive belt when i change the water pumpon ford mondeo 2001 model the belt was changed last... [Read more]
Mend timing belt corsa
2

Timing belt on corsa C 1.4 (Z14xe) 04 model?

Just bought a corsa 1.4 , looking in the service book I cannot find out when the timing belt is due . the ca... [Read more]
Mend dirt devil model
2

Dirt Devil Vision WideGlide model # 086700 doesn't have suction?

There had been a clog in the hose, but that is out now, but my vacuum still doesn't have any suction. The bel... [Read more]
Mend model mower problems
7

How can I fix my Craftsman model 536.270270 mid-engine rider?

I've used this mower for 3 seasons since buying it new. Because of drive problems with it I've changed all th... [Read more]
Mend lawn mower drive belt craftsman
1

1998 craftsman lawn mower burns belt off?

i have a 1998 model # 944-600801 20.5 hp craftsman ride on lawn mower that is an automatic i just put a new d... [Read more]
Mend hotpoint ideas changed
1

Squealiing from Hotpoint TL61?

Any ideas as to what is causing a deadful squealing from my TL61 ? Changed main bearing and drum support pads.... [Read more]
Mend lawn mower changed
1

how do I adjust the idler pulley on my weedeater lawn mower?

I changed the mower drive belt on my Weedeater model HD12538J 12.5 HP 38 inch lawn tractor back in June becaus... [Read more]
Mend belt changed unit
1

Belt routing?

I have a Murray model 38608X12B and recently changed belts.There was no belt on the unit to use as a guide fo ... [Read more]
Mend renault megane pump
1

Is it more difficult to change a head gasket on a Renault Megane?

My 1996 Renault Megane 1.6 needs a new head gasket, water pump and prob need to change the cam belt. Its too ... [Read more]
Mend model suction cleaned
2

Electrolux Model EL5010; S/N 03430422 - no suction?

I've cleaned the air filter, checked hoses for blockages and changed the belt and have the same result - no su... [Read more]
Mend tumble dryer repair motor
1

how can i fix my tumble dryer hotpoint first edition MODEL tl52?

you can hear the motor running but the drum does not go round i have changed the belt and it still does not wo... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vacuum Cleaners ...